The Electro-Myopulse 75L is the latest release of the most advanced technology in soft/connective tissue therapy. 

Capable of addressing even the most difficult pain, trauma and injury cases, including a wide variety of muscle, tendon, ligament, fascia and connective tissue syndromes; extremely beneficial results in post-op rehabilitation.

As all of Biomedical Design Instruments equipment, the Myopulse 75L is an Input/Output controlled device designed for operator feedback and precise bio-feedback modulated micro-current treatment delivery.

Added to this, the latest model Myopulse includes a tissue (feedback) controlled automatic frequency adjustment setting in Mode 1; expanded current and additional frequencies are now included in Mode 2.

This unique instrumentation combines the most advanced Myofascial monitoring assessment and variable waveform capacity for full therapeutic resolution of acute injury, trauma and chronic soft tissue pain syndromes.  

Electro-Myopulse 75 L Specifications

MODE-1

• Timer - 6, 8, 12, 1 6, 30 sec. & Continuous
• Intensity Selections- 50, 100, 200, 300, 400 & 600 uA RMS
• Output - Complex Wave Form at AC Setting -
     DC pulse train at Positive or Negative setting.
  Pulse Width at AC setting:
      Modulating envelope - 4 second period full envelope
      Raise time 300 mSec.
      Fall time 300 mSec.
      Carrier wave - 50% duty cycle
      Voltage - Variable 1 to 60 Volt peak to peak
   Pulse width at DC Setting:
       Pulse train - 50% duty cycle square wave.
       Raise time 300 mSec.,
       Fall Time 300 mSec.
       2 second period envelope
• Frequency - Manual Select - 0.5, 1, 2, 4, 8, 10, 20, 30, 40, 60 & 100 Hz.
• Frequency - AutoSet 0.5 to 60 Hz
• Electrode Outputs- two sets of output
• Manual Cycle Start Switch
• LCD Display Meter- current stimulation level indicator
• LED Bar Graph - Output Delivery Indicator

MODE 2

• Timer - 6, 8, 12, 16, 30sec. 10 min & Cont.
• Frequency - 0.5, 1.0, 2.0, 4.0, 6.0, 8.0, 10, 20, 40, 60, 80, 160 Hz.
• Intensity - 25, 50, 100, 200, 400, 800uA RMS.
  Output - Complex Wave Form
    Modulated Square Wave Envelope
    Frequency Modulated Pulse train with
    Alternating of Current Polarity each 2 Seconds.
• Feedback indicators - LCD Current Meter.

OTHER CHARACTERISTICS

• Power Supply - 24 VDC, fully rechargeable Lead-Acid batteries.
• Charger Power ON And HI Charge LED
• Dimensions - 19" long, 8" high, 16" deep
• Net weight 22 lb.

INCLUDED ACCESSORIES

• Operator’s Manual – 1 Trigger Probe (with cord attached) – 1 Indifferent Probe – Coil Cords (2) – Standard Ball Tip Set (2 narrow; 2 medium) – 1 Hand Bar (small) – Set of Placement Electrodes (1” X 1”) with 2 Straight Lead Wires – FOAM PADS (10) –  1 Single Large Foot Plate – Foot Plate Interface Bar – 1 Bottle Conductive Electrolyte Solution CEL-0144 – Charger Cord