The Electro-Acuscope 80L is the latest release of the most advanced technology in feedback-modulated micro-current neurological therapy.

As all of Biomedical Design Instruments equipment, the EA 80L is an Input/Output controlled (impedance monitoring) device designed for precision in addressing even the most difficult pain, trauma and injury rehabilitation cases.  While the Acuscope is specifically a Transcutaneous Electrical Nerve Stimulation modality, treatment is highly beneficial in a wide variety of muscle and connective tissue problems.

The Model 80L offers several new features:  automatic variable frequency conditioning has been added to enhance treatment utilizing Mode1; expanded micro-current modulation and higher frequency settings have been incorporated into Mode 2 in order to provide more comprehensive application for acute indications.

Over the last several years, a wider variety of electrodes have been designed to address a broader spectrum of conditions.  More precise auditory feedback and digital readouts allow the practitioner to gain full control from patient screening and assessment to complete therapeutic resolution. 

Electro-Acuscope 80L Specifications

MODE 1

• Power On - Switch Position-1
• 3 1/2 Digit LCD Electrode Contact Condition Display Monitor
    Display 0 to 100 Relative to Gain Spectrum
• Gain Spectrum - Range 000 to 999
    Range-000: 20K to 300K
    Range-999: 200K to 1 M
• Output - Complex Wave Form Modulated Square Wave Envelope
    Carrier Wave 50% Duty Cycle no load.
    Frequency Modulated Pulse train with Alternating of
    Current Polarity each 1.5 Seconds.
• Frequency - Manual Select - 0.5, 1.0, 2.0, 4.0, 8.0,10, 20, 40, 80, 160, 320Hz.
• Frequency – Auto Conditioning 1 Hz to 160 Hz
• Auto-frequency Reset Sequence to Zero Reset
• Auto-frequency Time Delay - 4.5 sec to 9 sec.
• Intensity - 25, 50, 100, 200, 400, 600uA RMS.
• Timer - 6, 8, 12, 16, 30sec. & Cont.
• Audio Feedback - Audio Threshold
• Volume Control - Loudspeaker
• Lo Battery LCD Indicator
• Lo Power Level Cut Off
• Two Types of Electrode Output
• Treatment Activator Button

MODE 2

• Power On - Switch Position-2.
• Timer - 6, 12, 30sec., 1.0, 10 min & Cont.
• Frequency - 0.5, 1.0, 2.0, 4.0, 10, 20, 50, 100, 200, 400, 600, 800 Hz.
• Intensity - 50, 100, 200, 300, 400, 600uA RMS.
  Output - Complex Wave Form, Modulated Square Wave Envelope
  Frequency Modulated Pulse train with
  Alternating of Current Polarity each 2 Seconds.
• Feedback indicators - LCD Current Meter

OTHER CHARACTERISTICS

• Power Supply - 24 VDC, fully rechargeable Lead-Acid batteries.
• Charger Power ON And HI Charge LED Indicator
• Dimensions - 19" long, 8" high, 16" deep Net weight 22 lbs.
• Net weight 22 lbs.

BASIC ACCESSORIES INCLUDED:

Operator’s Manual – 1 Trigger Probe (with attached cord) – 1 Indifferent Probe - Standard Ball Tip Set (2 narrow; 2 medium) - 1 Coil Cord – 1 Hand Bar (small) – Set of 2 Placement Electrodes (1” X 1” with Straight Lead Wires) – Set of Foam Pads (1” X 1”) – Charging Module – 1 Bottle Conductive Electrolyte Solution